High-Performance Pushrods ($100) – Get More Power From Your Engine!

Measure and Select Pushrods for Mopar Shaft Rocker Systems Hot Rod
Measure and Select Pushrods for Mopar Shaft Rocker Systems Hot Rod from www.hotrod.com

Introduction

If you’re looking to improve your engine’s performance, high-performance pushrods are a must-have. These pushrods are designed to withstand the stresses of high-performance engines, allowing them to operate at higher RPMs without breaking or bending.

What are Pushrods?

Pushrods are a vital component of an engine’s valvetrain system. They transmit the motion of the camshaft to the valve lifters, which then open and close the engine’s valves. Pushrods are typically made of steel or aluminum and come in a variety of lengths and diameters.

Why Upgrade to High-Performance Pushrods?

Standard pushrods are designed to handle the stresses of a stock engine. However, when you start adding performance upgrades like a high-lift camshaft or stiffer valve springs, the added stress can cause the pushrods to bend or break. High-performance pushrods are designed to handle these added stresses, allowing your engine to operate at higher RPMs without issue.

Types of High-Performance Pushrods

There are several types of high-performance pushrods available on the market, each with its own set of advantages and disadvantages. Let’s take a closer look at some of the most popular options.

Chromoly Pushrods

Chromoly pushrods are made from a high-strength alloy steel that is both lightweight and durable. They’re a popular choice for high-performance engines because they can withstand the stresses of high RPMs without bending or breaking.

One-Piece Pushrods

One-piece pushrods are made from a single piece of steel or aluminum, eliminating the need for a separate pushrod and lifter. They’re often used in racing applications because they’re lightweight and can withstand the stresses of high RPMs.

Heat-Treated Pushrods

Heat-treated pushrods are made from a steel alloy that has been heat-treated to increase its strength and durability. They’re a popular choice for engines that operate at high RPMs for extended periods.

Installing High-Performance Pushrods

Installing high-performance pushrods is a relatively simple process that can be done in a few hours with the right tools. Here’s a basic overview of the installation process:

Step 1: Remove the Valve Covers

Before you can install the new pushrods, you’ll need to remove the valve covers to gain access to the valvetrain.

Step 2: Remove the Old Pushrods

Using a pushrod removal tool, carefully remove each pushrod from the engine. Be sure to keep track of which pushrod came from which lifter.

Step 3: Install the New Pushrods

Install the new pushrods in the same order that you removed the old ones. Use a pushrod installation tool to ensure that the pushrods are installed correctly.

Step 4: Adjust the Valvetrain

Once the new pushrods are installed, you’ll need to adjust the valvetrain to ensure that everything is working properly. Follow the manufacturer’s instructions for adjusting the valvetrain.

Conclusion

High-performance pushrods are an essential upgrade for any engine that’s been modified for performance. They’re designed to handle the added stresses of high RPMs, allowing your engine to make more power without breaking or bending. With several types of high-performance pushrods available, it’s easy to find the right set for your engine. So if you’re looking to get more power from your engine, consider upgrading to high-performance pushrods today!

Read more

High-Performance Rocker Arms ($100) – Get More Power From Your Engine!

PRW Rocker Arms Buyer's Guide Tech Tips Included! Dragzine
PRW Rocker Arms Buyer's Guide Tech Tips Included! Dragzine from www.dragzine.com

Introduction

Are you looking for a way to get more power out of your engine without breaking the bank? Look no further than high-performance rocker arms! For just $100, you can upgrade your engine’s performance and take your driving experience to the next level.

What are high-performance rocker arms?

Rocker arms are a crucial component of your engine’s valve train. They are responsible for transferring motion from the camshaft to the valves, which allows fuel and air to enter the engine and exhaust to exit. High-performance rocker arms are designed to provide more lift and duration than stock rocker arms, which allows for increased airflow and performance.

How do they work?

High-performance rocker arms are typically made from stronger and lighter materials than stock rocker arms, such as aluminum or titanium. This allows them to withstand higher spring pressures and reduce valve train mass, which can lead to increased performance. They also feature a roller tip design, which reduces friction and wear on the valve stem.

Benefits of high-performance rocker arms

Upgrading to high-performance rocker arms can provide a number of benefits, including: – Increased horsepower and torque – Improved throttle response – Enhanced engine efficiency – Reduced valve train wear and tear – Longer engine life

Installation

Installing high-performance rocker arms is a relatively straightforward process that can be done in a few hours with basic hand tools. However, it is important to ensure that the new rocker arms are properly aligned and adjusted to prevent engine damage. It is recommended that you consult with a professional mechanic or engine builder if you are not confident in your abilities.

Compatibility

High-performance rocker arms are available for a wide range of engines, from small-block V8s to high-performance four-cylinder engines. However, it is important to ensure that the rocker arms you choose are compatible with your engine’s camshaft and valve train components.

Cost

High-performance rocker arms typically cost around $100-$300, depending on the manufacturer and application. While this may seem like a significant investment, the benefits of increased performance and engine longevity make it a worthwhile upgrade for many enthusiasts.

Conclusion

If you are looking for a cost-effective way to increase your engine’s performance, high-performance rocker arms are a great option. By improving airflow and reducing valve train mass, they can provide significant horsepower and torque gains while also improving engine efficiency and longevity. So why not upgrade your engine today and experience the thrill of high-performance driving?

Read more

Get More Power From Your Engine With High-Performance Engine Cat-Back Exhaust Systems ($100)

ARK Performance GRiP CatBack Exhaust System Burnt Tip RWD & AWD
ARK Performance GRiP CatBack Exhaust System Burnt Tip RWD & AWD from www.torqen.uk

The Power of an Engine

Engines are the heart of any vehicle. They provide the power that propels the car forward, making it move faster and run smoother. However, as engines work, they generate exhaust gases that need to be expelled through the exhaust system. The exhaust system plays a vital role in ensuring the engine runs smoothly by channeling the gases out of the engine. A high-performance engine cat-back exhaust system is a great way to get more power from your engine.

What is a High-Performance Engine Cat-back Exhaust System?

A high-performance engine cat-back exhaust system is an aftermarket exhaust system that replaces the stock exhaust system. It is called “cat-back” because it begins at the catalytic converter and ends at the exhaust tip, which is the part that expels the gases out of the vehicle. The system is designed to increase the flow of exhaust gases, allowing the engine to breathe better, which ultimately leads to more power.

Benefits of a High-Performance Engine Cat-back Exhaust System

There are several benefits of installing a high-performance engine cat-back exhaust system, including:

Increased Power

The most significant benefit of a high-performance engine cat-back exhaust system is that it increases the power of your engine. By reducing the backpressure on the engine, the system allows the engine to breathe better, which leads to more horsepower and torque.

Better Fuel Efficiency

A high-performance engine cat-back exhaust system can also improve the fuel efficiency of your vehicle. By increasing the flow of exhaust gases, the engine can operate more efficiently, which can lead to improved fuel economy.

Improved Sound

A high-performance engine cat-back exhaust system can also improve the sound of your vehicle. The system is designed to produce a deeper, more aggressive exhaust note, which can enhance the driving experience.

Installation and Cost

Installing a high-performance engine cat-back exhaust system is relatively simple and can be done by a professional mechanic or a DIY enthusiast. The cost of the system varies depending on the make and model of the vehicle, but most systems cost around $100.

Conclusion

A high-performance engine cat-back exhaust system is an excellent way to get more power from your engine. With increased power, better fuel efficiency, and improved sound, the system is a must-have for any performance enthusiast. The installation is simple, and the cost is affordable, making it a great investment for any vehicle. So, if you want to get more power from your engine, consider installing a high-performance engine cat-back exhaust system today!

Read more

Car Racing Engine Rocker Arms ($110) – Get More Power From Your Engine!

Why It's Time To Upgrade Your LS Engine's Rocker Arms
Why It's Time To Upgrade Your LS Engine's Rocker Arms from www.lsxmag.com

The Importance of Rocker Arms in Your Engine

If you’re looking to get more power from your car engine, then you need to know about the importance of rocker arms. These components are responsible for opening and closing the valves in your engine, which allows fuel and air to enter and exit. By upgrading your rocker arms, you can increase the lift and duration of your valves, which leads to more power and better efficiency.

Why Choose Car Racing Engine Rocker Arms?

Car racing engine rocker arms are specially designed to withstand the high stresses and temperatures associated with high-performance engines. They are made from high-quality materials like steel and aluminum, and are machined to exacting tolerances to ensure precise fit and operation. With car racing engine rocker arms, you can be sure that your engine will perform at its best, no matter how hard you push it.

How to Install Car Racing Engine Rocker Arms

Installing car racing engine rocker arms is a relatively simple process that can be done by anyone with basic mechanical skills. Here’s a quick overview of the steps involved: 1. Remove the valve covers and old rocker arms. 2. Clean the rocker arm studs and pushrod ends. 3. Lubricate the new rocker arms and install them onto the studs. 4. Adjust the valve lash to the manufacturer’s specifications. 5. Reinstall the valve covers.

The Benefits of Upgrading Your Rocker Arms

By upgrading your rocker arms, you can enjoy a number of benefits, including: – Increased horsepower and torque – Improved throttle response and acceleration – Better fuel efficiency – Reduced wear and tear on your engine – Longer engine life

How Much Do Car Racing Engine Rocker Arms Cost?

Car racing engine rocker arms typically cost around $110, depending on the brand and model. While this may seem like a significant investment, the benefits of upgrading your rocker arms far outweigh the cost. Plus, you can often recoup your investment in better performance and fuel efficiency.

Conclusion

If you want to get more power from your car engine, then upgrading your rocker arms is a great place to start. With car racing engine rocker arms, you can enjoy increased horsepower, improved efficiency, and better overall performance. So why wait? Upgrade your rocker arms today and experience the difference for yourself!

Read more

High-Performance Engine Exhaust Systems ($100) – Get More Power From Your Engine!

ATK High Performance Engines HP100 ATK High Performance Ford 347
ATK High Performance Engines HP100 ATK High Performance Ford 347 from www.summitracing.com

The Importance of a High-Performance Engine Exhaust System

As a car enthusiast, you know that the engine is the heart of your vehicle. However, for your engine to perform at its best, it requires a high-performance exhaust system. A good exhaust system not only enhances the performance of your engine but also improves the overall driving experience.

What is a High-Performance Engine Exhaust System?

A high-performance engine exhaust system is a set of components that work together to improve the flow of exhaust gases from your engine. It includes headers, catalytic converters, mufflers, and tailpipes. These components are designed to be less restrictive than the stock exhaust system, allowing the engine to breathe more freely. This results in increased horsepower, torque, and overall performance.

Benefits of Upgrading to a High-Performance Exhaust System

Upgrading to a high-performance exhaust system has several benefits, including: – Increased horsepower and torque – Improved fuel efficiency – Enhanced exhaust note – Reduced backpressure – Better throttle response

Choosing the Right High-Performance Exhaust System

When choosing a high-performance exhaust system, it’s important to consider several factors. These include the material (stainless steel, aluminized steel, or titanium), the design (cat-back, axle-back, or header-back), and the brand. It’s also essential to select an exhaust system that is compatible with your vehicle’s make and model.

Installation of a High-Performance Exhaust System

Installing a high-performance exhaust system is a straightforward process that can be done at home with the right tools. However, it’s recommended to have a professional mechanic handle the installation to ensure proper fitment and alignment.

Cost of a High-Performance Exhaust System

The cost of a high-performance exhaust system can vary depending on the material, design, and brand. Typically, a good-quality exhaust system can cost around $100. While this may seem expensive, the benefits of improved performance and driving experience make it a worthwhile investment.

Conclusion

In conclusion, upgrading to a high-performance engine exhaust system is a cost-effective way to improve the performance of your vehicle. It not only increases horsepower and torque but also provides other benefits such as improved fuel efficiency and better throttle response. So, if you’re looking to get the most out of your engine, consider upgrading to a high-performance exhaust system.

Read more

Car Racing Throttle Bodies ($110) – Get More Power From Your Engine!

MRP 4age Billet Race Individual Throttle Bodies Manon Racing Products
MRP 4age Billet Race Individual Throttle Bodies Manon Racing Products from www.mrpltd.co.nz

Introduction

Car racing is an exciting sport that requires a lot of skill and precision. One of the most important components of a race car is the throttle body. The throttle body controls the amount of air that enters the engine, which in turn affects the amount of power the car produces. In this article, we will discuss the benefits of using car racing throttle bodies to increase the power of your engine.

What is a Throttle Body?

A throttle body is a valve that controls the amount of air that enters the engine. It is located between the air intake filter and the engine’s intake manifold. When you press on the accelerator pedal, the throttle body opens up to allow more air into the engine. This increased airflow causes the engine to produce more power.

Why Upgrade Your Throttle Body?

Upgrading your throttle body can improve the performance of your engine in several ways. Firstly, it can increase the amount of air that enters the engine, which in turn increases the amount of power the engine produces. Secondly, it can improve throttle response, which means that the engine will respond more quickly to your accelerator pedal inputs. Finally, it can improve fuel efficiency by allowing the engine to operate more efficiently.

Choosing the Right Throttle Body

When choosing a throttle body, it is important to choose one that is designed specifically for your car’s make and model. Different cars have different engine sizes and configurations, which means that the throttle body needs to be designed to match the engine’s airflow requirements. It is also important to choose a throttle body that is made from high-quality materials and is designed to withstand the high temperatures and pressures that are generated by a race car engine.

Installation

Installing a new throttle body is a relatively straightforward process. However, it is important to follow the manufacturer’s instructions carefully to ensure that the throttle body is installed correctly. If you are not comfortable with doing the installation yourself, it is recommended that you take your car to a professional mechanic who has experience with installing performance parts.

Cost

Car racing throttle bodies can cost anywhere from $50 to $500, depending on the make and model of your car and the quality of the throttle body. However, it is important to remember that upgrading your throttle body can provide significant performance benefits, which can make it a worthwhile investment for serious racers.

Performance Benefits

Upgrading your throttle body can provide a range of performance benefits, including increased horsepower and torque, improved throttle response, and better fuel efficiency. These benefits can help you to achieve faster lap times, better acceleration, and improved overall performance on the track.

Conclusion

If you are serious about car racing, upgrading your throttle body is a worthwhile investment. By increasing the amount of air that enters the engine, improving throttle response, and increasing fuel efficiency, a high-quality throttle body can help you to achieve better performance on the track. So why not invest in a car racing throttle body today and see the difference it can make to your racing performance?

Read more

High-Performance Engine Pushrod Kits ($100) – Get More Power From Your Engine!

berengeredesign Is More Better Correct
berengeredesign Is More Better Correct from berengere-design.blogspot.com

Introduction

If you’re a car enthusiast, you’re always looking for ways to get more power from your engine. The good news is that you don’t have to spend a fortune to do it. With high-performance engine pushrod kits, you can get more power and torque without breaking the bank. In this article, we’ll take a closer look at what these kits are, how they work, and why you should consider installing them in your vehicle.

What are High-Performance Engine Pushrod Kits?

Pushrods are a critical component of your engine’s valve train. They are responsible for transmitting the motion of the camshaft to the rocker arms, which then open and close the valves. High-performance pushrod kits are designed to be stronger and more durable than stock pushrods. They are made from materials like chromoly or titanium, which can withstand higher loads and higher RPMs. By upgrading your pushrods, you can reduce valvetrain deflection, which can rob your engine of power.

How Do High-Performance Engine Pushrod Kits Work?

When you install a high-performance pushrod kit, you’re essentially replacing your stock pushrods with stronger and more durable ones. This allows your engine to rev higher and produce more power without risking valvetrain failure. The increased stiffness of the pushrods also helps to reduce deflection, which can lead to improved valve timing and better overall performance.

Why Should You Install High-Performance Engine Pushrod Kits?

There are several reasons why you should consider installing high-performance pushrod kits in your vehicle. First, they can help you get more power and torque from your engine. This is particularly useful if you’re a racer or just someone who enjoys pushing their car to the limit. Second, they can improve your engine’s durability and reliability. By reducing valvetrain deflection, you can reduce the risk of valve float, which can lead to engine damage. Finally, high-performance pushrod kits are relatively inexpensive compared to other engine upgrades, making them a great value for the performance-minded enthusiast.

How to Install High-Performance Engine Pushrod Kits

Installing high-performance pushrod kits is a relatively straightforward process that can be done with basic hand tools. However, if you’re not comfortable working on your engine, it’s best to leave this job to a professional mechanic. The first step is to remove the valve covers and rocker arms. Then, you’ll need to remove the stock pushrods and replace them with the high-performance ones. Finally, you’ll need to adjust the valve lash to ensure proper valve timing.

Conclusion

High-performance engine pushrod kits are an excellent way to get more power and torque from your engine without breaking the bank. By upgrading your pushrods, you can reduce valvetrain deflection and improve overall engine performance. If you’re a performance-minded car enthusiast, installing a high-performance pushrod kit is a must. Just be sure to follow the manufacturer’s instructions and, if necessary, seek the help of a professional mechanic to ensure a proper installation.

Read more

Car Racing Engine Valve Retainers ($110) – Get More Power From Your Engine!

Howards Engine Valve Spring Retainer Set 97162; Steel 7° 8mm 1.155" to
Howards Engine Valve Spring Retainer Set 97162; Steel 7° 8mm 1.155" to from www.ebay.com

Introduction

Car racing enthusiasts are always on the lookout for ways to increase the power of their engines. One of the most effective ways to do so is by using high-quality valve retainers. In this article, we will discuss how valve retainers can help you get more power from your engine.

What are Valve Retainers?

Valve retainers are small components that are used to hold the valves in place in the engine. They are made of high-quality materials such as titanium or steel, and they are designed to withstand the high temperatures and pressures that occur in the engine.

How Do They Work?

Valve retainers work by reducing the amount of valve float in the engine. Valve float occurs when the valves are not held firmly enough in place, which can cause them to bounce around and not close properly. This can result in a loss of power and efficiency in the engine.

Benefits of Using Valve Retainers

Using valve retainers has several benefits for car racing enthusiasts. Firstly, they can help to increase the power and performance of the engine. They do this by reducing valve float, which allows the engine to operate more efficiently. Secondly, valve retainers can help to increase the lifespan of the engine. By reducing valve float, they can also reduce wear and tear on the engine components, which can help to extend the life of the engine. Lastly, valve retainers are relatively inexpensive compared to other engine components. At just $110, they are a cost-effective way to improve the performance of your engine.

Choosing the Right Valve Retainers

When choosing valve retainers, it is important to choose ones that are compatible with your engine. You should also choose ones that are made of high-quality materials, such as titanium or steel. It is also important to choose valve retainers that are the right size for your engine. Valve retainers come in different sizes, so you will need to choose ones that are the right size for your engine.

Installation of Valve Retainers

Installing valve retainers is a relatively simple process. You will need to remove the valve springs from your engine, and then replace them with the valve retainers. You will also need to adjust the valve lash to ensure that the valves are properly seated. If you are not comfortable with installing valve retainers yourself, you should take your car to a professional mechanic who can do it for you.

Conclusion

Valve retainers are an excellent way to increase the power and performance of your car racing engine. They are relatively inexpensive, easy to install, and can provide significant benefits to your engine. If you are looking for a way to get more power from your engine, consider investing in high-quality valve retainers.

Read more

High-Performance Engine Connecting Rods ($100) – Get More Power From Your Engine!

Predator Performance Billet Connecting Rod
Predator Performance Billet Connecting Rod from www.gopowersports.com

The Importance of Connecting Rods in Your Engine

Connecting rods are a crucial component of any high-performance engine, as they connect the pistons to the crankshaft and transfer power from the combustion process to the wheels. As such, the quality and strength of your connecting rods can have a significant impact on the overall performance of your engine.

Many stock connecting rods are made from cast iron or steel, which can limit the amount of power that your engine can produce. Upgrading to high-performance connecting rods can help to increase horsepower, torque, and overall engine longevity.

What Makes High-Performance Connecting Rods Different?

High-performance connecting rods are typically made from stronger and lighter materials than stock rods, such as forged steel or aluminum. These materials can handle higher levels of stress and heat without warping or bending, which can lead to catastrophic engine failure.

Additionally, high-performance connecting rods are often designed with specific weight and balance ratios to optimize engine performance. This can help to reduce vibration and improve overall engine efficiency, resulting in faster acceleration and better fuel economy.

Choosing the Right Connecting Rods for Your Engine

When choosing high-performance connecting rods for your engine, it’s important to consider a few key factors:

  • The intended use of your vehicle (street, track, or drag racing)
  • The type of engine you have (four-cylinder, six-cylinder, V8, etc.)
  • Your budget and performance goals

There are many different brands and models of high-performance connecting rods on the market, each with their own unique features and benefits. Some popular options include Eagle, Manley, and Carrillo.

The Benefits of Upgrading to High-Performance Connecting Rods

Upgrading to high-performance connecting rods can provide a range of benefits for your engine, including:

  • Increased horsepower and torque
  • Better engine response and acceleration
  • Improved fuel efficiency
  • Reduced engine vibration and noise
  • Increased engine longevity and durability

Overall, investing in high-performance connecting rods can help you get more power and performance out of your engine, whether you’re a weekend racer or a daily driver.

Conclusion

If you’re looking to take your engine to the next level, upgrading to high-performance connecting rods is a great place to start. With a range of options available at affordable prices (around $100 per rod), it’s easy to find the right connecting rods for your engine and budget.

Whether you’re building a custom race engine or just looking to add some extra horsepower to your daily driver, high-performance connecting rods can help you achieve your performance goals and get the most out of your engine.

Read more